High-quality HVAC repair and installation services by Comfort Solutions in Utah.

Ogden's Home for HVAC, Fireplaces & Plumbing Since 2000

Born in Ogden · 25+ years serving Weber County · 4.9 stars from 3,000+ homeowners · 24/7 emergency service

This is where we started. Comfort Solutions opened its West Haven showroom on July 1, 2000 and has been serving Ogden homeowners ever since. We know these homes because we’ve been working on them for a quarter century, from the Victorian-era houses in East Central to the post-war ramblers on the East Bench.

Ogden’s mountain climate doesn’t go easy on home systems. Winter lows average 22°F with 65+ inches of snowfall, valley inversions trap cold air for days, and water hardness reaches 410 PPM seasonally. Two-thirds of the housing stock was built before 2000 — making Ogden furnace replacement and heating services a common need for local homeowners.

Flexible Solutions for Your Home & Budget

Unexpected repairs, replacements, and home comfort upgrades are rarely part of the plan. That’s why Comfort Solutions offers flexible financing options, maintenance plan solutions, and 24/7 emergency service to help make essential HVAC and plumbing work more manageable. Whether you need a quick repair, routine maintenance, or a major system upgrade, our team is here to provide reliable solutions that fit your home, your needs, and your budget. 

What to Consider Before You Hire an HVAC Contractor

Complete Home Comfort Services in Ogden

One team for year-round comfort. Comfort Solutions handles heating, cooling, plumbing, and fireplace needs throughout Ogden, including 24/7 emergency repairs when problems can’t wait.

Services We Offer in Odgen

How Valley Inversions and Hard Water Compound the Problem

Winter inversions are Ogden’s signature climate event. Cold air settles into the valley and stays, keeping temperatures at or below freezing for days. Furnaces run nearly nonstop during these stretches. That sustained load exposes every weak point: dirty filters, failing flame sensors, worn ignition components.

Water from the Ogden River and Pineview Reservoir ranges from 170 to 410 PPM depending on the season. That mineral content scales water heater tanks, reduces pipe flow, and wears out fixtures. Homes near the University District and Southeast Ogden tend to see the hardest water in the area.

At 4,300-5,000 feet elevation, furnaces also burn fuel less efficiently. The same unit that runs fine at sea level works 10-15% harder here.

High-efficiency HVAC services by Comfort Solutions in Utah, specializing in air conditioning and heating installation.

What Our Customers Say About Comfort Solutions

4.9★ Rating from Over 3,000 Homeowners

Keeping families comfortable drives everything we do. Which means we show up fast when your heat goes out. Technicians arrive when promised with straightforward pricing—no surprises, no games.

Posted on Google Google
Victoria Nielsen profile picture
Victoria Nielsen
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Taylor came out today to assess my furnace and with his expertise I ordered a new furnance. Cesar came out and did the installation and did a great job him and his crew were great completely cleaned up their mess great company to work with
Posted on Google Google
Priscilla Hector profile picture
Priscilla Hector
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Quality service by competent technicians
Posted on Google Google
John Freitas profile picture
John Freitas
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Dave was on time (actually he was early and called ahead of time to see if he could come early), professional, adhered to COVID protocols, was efficient and helpful. He walked me through what he was doing and what to look out for regarding performance. Best check I have had in a few years! Kudos to Dave!!
Posted on Google Google
Calvin Reeder profile picture
Calvin Reeder
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Alex does a great job and I will continue to request him. He was joined by Finn today and they were very thorough.
Posted on Google Google
Pat Larkin profile picture
Pat Larkin
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Darren from Comfort Solutions is great, very knowledgeable. He performed our fall maintenance on our gas burning fireplace.
Posted on Google Google
Jeremy Bott profile picture
Jeremy Bott
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Alex was very professional and helped us with our heater in a fast polite manner. Would recommend comfort solutions again
Posted on Google Google
brent merrill profile picture
brent merrill
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Drake was fast, very knowledgeable, and willing to be very aware of the cleanliness of our home. He deserves a raise!
Posted on Google Google
Kevin Knight profile picture
Kevin Knight
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
These guys are fantastic. We have them come once a year to service our gas fireplace. They’re incredibly knowledgeable, friendly, and thorough. They’re also very responsive and have been able to accommodate our schedule. Highly recommend.
Posted on Google Google
Cindy profile picture
Cindy
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Darren Dalley from Comfort Solutions was so helpful and courteous when he came to our home to service our furnace. He was extremely knowledgeable and professional. I have been extremely pleased with Comfort Solutions for the past 7 years and highly recommend their service.
Verified by Trustindex
Trustindex verified that these reviews were published on Comfort Solutions's Google Business Profile. Learn more
Comfort Solutions service van and technician greeting a homeowner

The Hometown Advantage

We didn’t expand into Ogden from somewhere else. We started here. That means 25 years of experience with Weber County’s specific building stock, water chemistry, and climate patterns.

  • Four acquisitions built our multi-trade bench: Lloyd’s Heating and Air, Elite Fireplace, Robert Love Heating, Airworx HVAC.
  • 3,000+ homeowners have left us a 4.9-star Google rating. BBB A+ with 4.96 stars.
  • Among the nation’s largest Napoleon fireplace suppliers.
  • Free in-home estimates. Wells Fargo financing with 12-month no-interest options.
  • Every technician is certified across HVAC, fireplace, and plumbing trades.

From Railroad Town to Mountain Hub: Why Ogden Homes Need Multi-Trade Service

Victorian homes near 25th Street have original gas lines and masonry chimneys. East Bench ramblers have aging forced-air systems and galvanized plumbing. Most HVAC companies handle one trade. Most plumbers don’t touch fireplaces.

We grew through four acquisitions specifically to eliminate that problem. One technician assesses your furnace, inspects the fireplace flue, and checks the water heater in a single visit. No referrals, no second company for the fireplace. One call covers every trade.

Ogden Neighborhoods We Serve

Frequently Asked Questions

Why does my furnace never shut off during inversions?

Ogden’s valley inversions hold temperatures below freezing for days. At 4,300+ feet, your furnace burns fuel less efficiently on top of that. If the system runs continuously and can’t reach set temperature, it may be undersized, have restricted airflow, or need a tune-up.

At least annually. Pineview Reservoir water peaks at 410 PPM during certain months. That mineral load settles as sediment in your tank and coats heating elements. Flushing clears it. A water softener prevents it from accumulating in the first place.

1723 S 1900 W, West Haven, about 5 minutes from downtown Ogden. Monday-Friday 10am-6pm, Saturday 10am-4pm. It’s one of the largest fireplace showrooms in Utah.

Book Your Free Estimate

We’ve been Ogden’s HVAC, fireplace, and plumbing company since day one. Call (801) 923-1075 anytime, or request your free in-home estimate online.

Recent Jobs and Reviews in Ogden, UT

Rated 5.0 out of 5 stars based on 68 customer reviews

Ogden, UT at a glance

Comfort Solutions has completed 3 jobs in Ogden, UT on November 4, 2026.

The 8 customer reviews shown here average 5.0 out of 5.

Comfort Solutions has completed 355 jobs in Ogden, UT in the last 12 months.

Job Locations and Reviews

Installed a new Amana EL297UH070XV36BK 97% AFUE two-stage gas furnace paired with an EL19KPV-036-230 3-ton variable-speed heat pump and a CK40CT-36C-71 coil, and connected the PVC condensate and venting lines. Installed and configured a smart thermostat, then verified communication, system settings, and proper operation of the heating and cooling equipment.
Installed a new Amana EL297UH070XV36BK 97% AFUE two-stage gas furnace paired with an EL19KPV-036-230 3-ton variable-speed heat pump and a CK40CT-36C-71 coil, and connected the PVC condensate and venting lines. Installed and configured a smart thermostat, then verified communication, system settings, and proper operation of the heating and cooling equipment.
Kallen L.
Kallen L. Checked in
Installed a new Amana EL297UH070XV36BK 97% AFUE two-stage gas furnace paired with an EL19KPV-036-230 3-ton variable-speed heat pump and a CK40CT-36C-71 coil, and connected the PVC condensate and venting lines. Installed and configured a smart thermostat, then verified communication, system settings, and proper operation of the heating and cooling equipment.
Ogden, UT 84404
Installed a new Lennox ML180UH070E36BK 70,000 BTU upflow gas furnace in the utility closet, connecting it to the existing supply plenum and return-side filter rack with a new filter in place. Reconnected the gas line with a flexible connector, vent piping to the flue, and PVC condensate drain to the floor drain, then labeled the unit with the installation details.
Installed a new Lennox ML180UH070E36BK 70,000 BTU upflow gas furnace in the utility closet, connecting it to the existing supply plenum and return-side filter rack with a new filter in place. Reconnected the gas line with a flexible connector, vent piping to the flue, and PVC condensate drain to the floor drain, then labeled the unit with the installation details.
Jacob N.
Jacob N. Checked in
Installed a new Lennox ML180UH070E36BK 70,000 BTU upflow gas furnace in the utility closet, connecting it to the existing supply plenum and return-side filter rack with a new filter in place. Reconnected the gas line with a flexible connector, vent piping to the flue, and PVC condensate drain to the floor drain, then labeled the unit with the installation details.
Ogden, UT 84404
Performed annual maintenance on a 2021 gas fireplace and furnace as part of a recurring service plan, with no reported issues. Opened the furnace and inspected the control board, transformer, wiring harnesses, blower assembly, draft inducer, and PVC venting, and took electrical measurements with a clamp meter to verify operation. No visible damage, corrosion, or frost was observed on the furnace components.
Performed annual maintenance on a 2021 gas fireplace and furnace as part of a recurring service plan, with no reported issues. Opened the furnace and inspected the control board, transformer, wiring harnesses, blower assembly, draft inducer, and PVC venting, and took electrical measurements with a clamp meter to verify operation. No visible damage, corrosion, or frost was observed on the furnace components.
Darren D.
Darren D. Checked in
Performed annual maintenance on a 2021 gas fireplace and furnace as part of a recurring service plan, with no reported issues. Opened the furnace and inspected the control board, transformer, wiring harnesses, blower assembly, draft inducer, and PVC venting, and took electrical measurements with a clamp meter to verify operation. No visible damage, corrosion, or frost was observed on the furnace components.
Ogden, UT 84414
Review
Todd was busy at work right away. Took care of everything quickly.
Fuentes - Ogden, UT 84404
Review
Taylor was an absolute joy to work with. He is very professional, knowledgeable, and compassionate with our concerns. He listened and answered our questions with integrity. I feel very good about our purchase because of him.
Taryn - Ogden, UT 84414
Review
Very knowlegeable
Wymer - Ogden, UT 84405
Review
Darren was amazing and personable. He helped explain what was going on and explained full expense and available options. He was even able to come next day to finish the installation instead of next week like scheduled. 100% wonderful and will use again
AGreenhalgh - Ogden, UT 84414
Review
Great service
Fawcett - Ogden, UT 84403
Review
Logan did an awesome job. He diagnosed and explained the problem quickly. I would recommend him to anyone who has a gas fireplace.
Krengel - Ogden, UT 84405
Review
I like to learn as much as I can about the systems in my home and DIY whenever possible. I love being able to call pros like Shane in, who are willing to walk me through their process and help me learn more about my home.
Medina - Ogden, UT 84404
Review
Todd was friendly and very efficient
Stimpson - Ogden, UT 84401