Ogden's Home for HVAC, Fireplaces & Plumbing Since 2000

Born in Ogden · 25+ years serving Weber County · 4.9 stars from 3,000+ homeowners · 24/7 emergency service

This is where we started. Comfort Solutions opened its West Haven showroom on July 1, 2000 and has been serving Ogden homeowners ever since. We know these homes because we’ve been working on them for a quarter century, from the Victorian-era houses in East Central to the post-war ramblers on the East Bench.

Ogden’s mountain climate doesn’t go easy on home systems. Winter lows average 22°F with 65+ inches of snowfall, valley inversions trap cold air for days, and water hardness reaches 410 PPM seasonally. Two-thirds of the housing stock was built before 2000 — making Ogden furnace replacement and heating services a common need for local homeowners.

Flexible Solutions for Your Home & Budget

Unexpected repairs, replacements, and home comfort upgrades are rarely part of the plan. That’s why Comfort Solutions offers flexible financing options, maintenance plan solutions, and 24/7 emergency service to help make essential HVAC and plumbing work more manageable. Whether you need a quick repair, routine maintenance, or a major system upgrade, our team is here to provide reliable solutions that fit your home, your needs, and your budget.

Complete Home Comfort Services in Ogden

One team for year-round comfort. Comfort Solutions handles heating, cooling, plumbing, and fireplace needs throughout Ogden, including 24/7 emergency repairs when problems can’t wait.

Services We Offer in Odgen

Air Conditioner Installation

Air Conditioning Repair

Air Conditioner Services

Fireplace Inserts

Furnace Repairs

HVAC

How Valley Inversions and Hard Water Compound the Problem

Winter inversions are Ogden’s signature climate event. Cold air settles into the valley and stays, keeping temperatures at or below freezing for days. Furnaces run nearly nonstop during these stretches. That sustained load exposes every weak point: dirty filters, failing flame sensors, worn ignition components.

Water from the Ogden River and Pineview Reservoir ranges from 170 to 410 PPM depending on the season. That mineral content scales water heater tanks, reduces pipe flow, and wears out fixtures. Homes near the University District and Southeast Ogden tend to see the hardest water in the area.

At 4,300-5,000 feet elevation, furnaces also burn fuel less efficiently. The same unit that runs fine at sea level works 10-15% harder here.

What Our Customers Say About Comfort Solutions

4.9★ Rating from Over 3,000 Homeowners

Keeping families comfortable drives everything we do. Which means we show up fast when your heat goes out. Technicians arrive when promised with straightforward pricing—no surprises, no games.

Victoria Nielsen

Taylor came out today to assess my furnace and with his expertise I ordered a new furnance. Cesar came out and did the installation and did a great job him and his crew were great completely cleaned up their mess great company to work with

Priscilla Hector

Quality service by competent technicians

John Freitas

Dave was on time (actually he was early and called ahead of time to see if he could come early), professional, adhered to COVID protocols, was efficient and helpful. He walked me through what he was doing and what to look out for regarding performance. Best check I have had in a few years! Kudos to Dave!!

Calvin Reeder

Alex does a great job and I will continue to request him. He was joined by Finn today and they were very thorough.

Pat Larkin

Darren from Comfort Solutions is great, very knowledgeable. He performed our fall maintenance on our gas burning fireplace.

Jeremy Bott

Alex was very professional and helped us with our heater in a fast polite manner. Would recommend comfort solutions again

brent merrill

Drake was fast, very knowledgeable, and willing to be very aware of the cleanliness of our home. He deserves a raise!

Kevin Knight

These guys are fantastic. We have them come once a year to service our gas fireplace. They’re incredibly knowledgeable, friendly, and thorough. They’re also very responsive and have been able to accommodate our schedule. Highly recommend.

Cindy

Darren Dalley from Comfort Solutions was so helpful and courteous when he came to our home to service our furnace. He was extremely knowledgeable and professional. I have been extremely pleased with Comfort Solutions for the past 7 years and highly recommend their service.

Verified by Trustindex

Trustindex verified that these reviews were published on Comfort Solutions's Google Business Profile. Learn more

The Hometown Advantage

We didn’t expand into Ogden from somewhere else. We started here. That means 25 years of experience with Weber County’s specific building stock, water chemistry, and climate patterns.

Four acquisitions built our multi-trade bench: Lloyd’s Heating and Air, Elite Fireplace, Robert Love Heating, Airworx HVAC.
3,000+ homeowners have left us a 4.9-star Google rating. BBB A+ with 4.96 stars.
Among the nation’s largest Napoleon fireplace suppliers.
Free in-home estimates. Wells Fargo financing with 12-month no-interest options.
Every technician is certified across HVAC, fireplace, and plumbing trades.

From Railroad Town to Mountain Hub: Why Ogden Homes Need Multi-Trade Service

Victorian homes near 25th Street have original gas lines and masonry chimneys. East Bench ramblers have aging forced-air systems and galvanized plumbing. Most HVAC companies handle one trade. Most plumbers don’t touch fireplaces.

We grew through four acquisitions specifically to eliminate that problem. One technician assesses your furnace, inspects the fireplace flue, and checks the water heater in a single visit. No referrals, no second company for the fireplace. One call covers every trade.

Ogden Neighborhoods We Serve

East Central
East Bench
Downtown / Historic 25th Street
West Ogden
North End
Southeast Ogden
Hillcrest Bonneville
University District
Mountain View
Nine Rails Creative District
Canyon Road

Frequently Asked Questions

Why does my furnace never shut off during inversions?

Ogden’s valley inversions hold temperatures below freezing for days. At 4,300+ feet, your furnace burns fuel less efficiently on top of that. If the system runs continuously and can’t reach set temperature, it may be undersized, have restricted airflow, or need a tune-up.

How often should I flush my water heater in Ogden?

At least annually. Pineview Reservoir water peaks at 410 PPM during certain months. That mineral load settles as sediment in your tank and coats heating elements. Flushing clears it. A water softener prevents it from accumulating in the first place.

Where is the Comfort Solutions showroom?

1723 S 1900 W, West Haven, about 5 minutes from downtown Ogden. Monday-Friday 10am-6pm, Saturday 10am-4pm. It’s one of the largest fireplace showrooms in Utah.

Book Your Free Estimate

We’ve been Ogden’s HVAC, fireplace, and plumbing company since day one. Call (801) 923-1075 anytime, or request your free in-home estimate online.

Recent Jobs and Reviews in Ogden, UT

Rated 5.0 out of 5 stars based on 68 customer reviews

Ogden, UT at a glance

Comfort Solutions has completed 3 jobs in Ogden, UT in October 2026.

The most recent job was on October 30, 2026.

Comfort Solutions has completed 355 jobs in Ogden, UT in the last 12 months.

Job Locations and Reviews

Performed a full maintenance tune-up on a 20-year-old basement-installed gas furnace, including a combustion analysis that recorded 83.5% total efficiency, 11.3 ppm CO (26.8 ppm air-free), 4.93% CO2, 12.1% O2, and a 230.9°F flue temperature with elevated excess air. Inspected the flame sensor and found corrosion and tarnishing on the ceramic insulator and rod, indicating the component is deteriorated and may affect reliable flame sensing.

Kyle W. Checked in 14 days ago

Performed a full maintenance tune-up on a 20-year-old basement-installed gas furnace, including a combustion analysis that recorded 83.5% total efficiency, 11.3 ppm CO (26.8 ppm air-free), 4.93% CO2, 12.1% O2, and a 230.9°F flue temperature with elevated excess air. Inspected the flame sensor and found corrosion and tarnishing on the ceramic insulator and rod, indicating the component is deteriorated and may affect reliable flame sensing.

Ogden, UT 84404

Performed maintenance on two original-to-home (1993) gas fireplaces, including cleaning the firebox, ceramic log sets, glass, and burner assemblies, and inspecting the venting, controls, and safety components. Verified proper ignition and flame pattern on both units, with the main-floor fireplace confirmed clean and operational and the furnace-connected unit tuned up and functioning correctly, with light soot and ash removed from the firebox interior.

Shane T. Checked in 14 days ago

Performed maintenance on two original-to-home (1993) gas fireplaces, including cleaning the firebox, ceramic log sets, glass, and burner assemblies, and inspecting the venting, controls, and safety components. Verified proper ignition and flame pattern on both units, with the main-floor fireplace confirmed clean and operational and the furnace-connected unit tuned up and functioning correctly, with light soot and ash removed from the firebox interior.

Ogden, UT 84414

Performed a seasonal maintenance tune-up on two units, a gas furnace and a fireplace, with no customer-reported issues. Removed the furnace access panel to inspect the burner assembly, gas valve, wiring, flue, and condensate drain, and ran a combustion analysis using a UEi C161 analyzer, which showed CO at 4 ppm. No obvious rust, frost, or damage was observed, and both units were left operational.

Shane T. Checked in 15 days ago

Performed a seasonal maintenance tune-up on two units, a gas furnace and a fireplace, with no customer-reported issues. Removed the furnace access panel to inspect the burner assembly, gas valve, wiring, flue, and condensate drain, and ran a combustion analysis using a UEi C161 analyzer, which showed CO at 4 ppm. No obvious rust, frost, or damage was observed, and both units were left operational.